JARVIS-FF NIST Disclaimer

Structural formula: Zr2Ni

Force-field: Ni-Zr_Mendelev_2010.eam.fs

Space group : I4/mcm

JARVIS ID: JLMP-1636

Download input files

Elastic tensor (GPa)

Elastic tensor for the conventional cell of the system were calculated with LAMMPS in.elastic script at 0 K [Source] . Similar script can be used for temperature dependent elastic constants and will be available here soon. WARNING! Please note that the starting lattice parameters of crystal structures were taken from density functional theory (DFT) and not from experiments. Generic minimization parameters were chosen for LAMMPS run rather than testing them for each individual case such as energy convergence criterion and so on. Hence, there are chances that the calculation gets trapped in a local energy minima. Please read carefully the assumptions taken during calculations in the in.elastic script and use the data at your own risk

216.6 171.2 170.6 0.0 -0.0 0.0
171.2 216.6 170.6 0.0 0.0 0.0
170.6 170.6 290.2 0.0 0.0 -0.0
0.0 0.0 0.0 45.7 0.0 -0.0
-0.0 0.0 0.0 0.0 45.7 0.0
0.0 0.0 -0.0 -0.0 0.0 34.6

Bv: 194.2 GPa

Gv: 39.3 GPa

Vacancy-formation energy (eV)

Vacancy formation energies were calculated by deleting the symmterically distinct atoms in the system [Source]. In the table, vacancy forming element, its multiplicity, and defect-formation energy are given. The reference element cohesive energies were calculated with the most stable structure for the element found on materials project database. Defect structures were constructed with the fully-relaxed bulk system as input. For defect-structures energetics calculations, constant volume ensemble was used. We impose the defect structures to be at least 1.5 nm large in all directions.

Element Mult. Value
Zr 8 4.141 Download cif file
Ni 4 1.787 Download cif file

Surface energy (J/m2)

Surface energies were calculated for symmterically distinct crystal surfaces . In the table, (hkl) indices and surface enegies are given. For surface-structure energetics, constant volume ensemble was used. We impose the slab thickness to be at least 2 nm and vaccum size of 2.5 nm. The maximum miller index is taken as 3.

Visualize Phonons here
Phonon mode (cm-1) Representation
-0.0001031274 None
117.238728376 A2u I
122.509672465 Eu I
126.510456545 Eg R
129.789961257 B1g R
140.548275187 A2g
159.671670267 A1g R
163.371464122 B1u
187.834332608 B2g R
206.549100547 Eg R
212.981930257 Eu I
235.183174802 A2g
All phonon mode at Gamma point (cm-1)
-0.0001031381
-9.2584e-06
-8.6965e-06
104.550448218
104.711332061
104.711332061
106.697723491
108.376834858
116.003558741
117.238728376
122.509672465
126.510456545
127.540809101
129.789961257
140.548275187
154.351710392
154.351710392
159.671670267
163.371464122
164.855412785
185.193836814
187.834332608
197.083009309
197.083009309
206.549100547
208.628110182
212.981930257
212.981930257
220.394839286
224.261712273
235.183174802

See also

Links to other databases or papers are provided below

JVASP-14657

mp-328

Energy above hull from mp (eV): 0.0