× Updated! Potentials that share interactions are now listed as related models.

1997--Vailhe-C-Farkas-D--Co-Al

Citation: C. Vailhé, and D. Farkas (1997), "Shear faults and dislocation core structures in B2 CoAl", Journal of Materials Research, 12(10), 2559-2570. DOI: 10.1557/jmr.1997.0340.
Abstract: Interatomic potentials of the embedded atom and embedded defect type were derived for the Co–Al system by empirical fitting to the properties of the B2 CoAl phase. The embedded atom potentials reproduced most of the properties needed, except that, in using this method, the elastic constants cannot be fitted exactly because CoAl has a negative Cauchy pressure. In order to overcome this limitation and fit the elastic constants correctly, angular forces were added using the embedded defect technique. The effects of angular forces to the embedded atom potentials were seen in the elastic constants, particularly C44. Planar fault energies changed up to 30% in the 110 and 112 γ surfaces and the vacancy formation energies were also very sensitive to the non-central forces. Dislocation core structures and Peierls stress values were computed for the 〈100〉 and 〈111〉 dislocations without angular forces. As a general result, the dislocations with a planar core moved for critical stress values below 250 MPa in contrast with the nonplanar cores for which the critical stress values were above 1500 MPa. The easiest dislocations to move were the 1/2〈111〉 edge superpartials, and the overall preferred slip plane was 110. These results were compared with experimental observations in CoAl and previously simulated dislocations in NiAl.

See Computed Properties
Notes: Listing found at https://openkim.org.
Link(s):
Date Created: October 5, 2010 | Last updated: July 09, 2021